Buy MTM5200 380–430 MHz: the M83PCS6TZ5_N kit and 12/24 V power arrangements
To purchase the MTM5200 in transport, it is important to agree on the radio and the terms of its installation. Our offer uses the code M83PCS6TZ5_N and the range of 380-430 MHz. We will analyze the composition of the application, especially for vehicles with 24 V board and for a fleet with different cars.
What position is being discussed
The M83PCS6TZ5_N code is retained in the request in its entirety as indicated in the statement provided. The exact hardware design is confirmed by the marking of the proposed station and documentation. Emphasizing cannot be automatically replaced with the intended letter of the version, and information about the entire family of MTM5000 can be transferred to any instance.
The section 380-430 MHz is indicated for this catalogue entry. Verify it with your TETRA network and the actual configuration of the device. Further, the software configuration, necessary services and registration with the operator are agreed. The same standard does not replace verification of a specific delivery in the current system.
Physical kit and work for the car
The list includes a magnetically based car antenna, a 6 m power supply cable, a lock bracket, a microphone, a 13 W external speaker with an additional cable, and a brief guide. These components are included in the discussion of the specification; their exact configuration and availability are confirmed in the quotation.
| Position | What to Check for Your Transportation |
|---|---|
| MTM5200 | Marking, configuration 380-430 MHz and network configuration |
| Power supply cable 6 m | Route gasket and agreed connection to the source |
| Magnetic-based antenna | Configuration, installation site and desired antenna path |
| Brace with lock | Location and compliance with the selected installation |
| Microphone and speaker 13 W | Placement, composition of cables and workplace of the operator |
| Decision for board 24 V | Separately selected source for the permissible power supply station |
The six meters on the list belong to the power supply cable. This is the unconfirmed length of the antenna feeder. Antenna tract and method of installation are agreed independently for the selected car. An illustration of the station with the front panel also does not prove the composition of all accessories in the package.
power supply 12 V and equipment with board 24 V
The official sheet of the MTM5000 indicates the input range of 10.8–15.6 V of direct current. This is a specific requirement for power supply stations. For the car, which is called “12-volt”, still evaluate the connection conditions and operating voltage at the selected point.
It is impossible to connect the station directly to the 24V board according to this characteristic. A suitable power supply solution is required, which is selected separately for the vehicle and equipment load. The application includes the type of equipment, information about the onboard network and operating conditions; the scheme, protection and installation are agreed by the responsible organization for documentation. We do not assign an unknown transducer to be sufficient by the inscription "24/12".
Do not mix radio power and sound.
In the documentation of the MTM5200 family, it is designated as a variant with a radio power of 3 W. This is not 13 W from the line of the external speaker: it describes the audio belonging to the proposed set. Save the two assignments separately in the application and do not use speaker power as a transmitter characteristic.
Three watts also do not provide a guaranteed communication distance or cover a particular route. The result depends on the network and the set installed. If certain areas of work are important for the fleet, include them in the verification program, rather than replacing acceptance with comparing one number with a wearable terminal.
What to agree on for different cars
Divide the statement by type of transport, onboard voltage and place of installation. Indicate whether a re-equipment of the existing workplace or a new set is required. Size and method of attachment are checked on location: the designation of the standard format does not promise that any free hole in the panel is suitable for stations and cables.
If you need a different layout of the panel or special environment conditions, coordinate configuration and accessories separately. The front panel photo does not confirm remote installation or IP67 protection of the entire station. The quotation should list the selected components and works for your task.
How to start a purchase
“Please request the MTM5200, M83PCS6TZ5_N, 380-430 MHz kit. Transport: [type], board [12/24 V and data], installation site [description]. We need [number of] kits. Network and service requirements are included. Please confirm configuration, components, power supply, setup and installation volume, cost and current availability. Receipt is [city].”
Below is the MTM5200 card and a separate handheld MTP6550 for crew. Their roles can be discussed together, but kits, power supply, and network entry agree on each item. The MTM5200 is listed on the official page for EMEA as a model no longer manufactured or sold by a manufacturer in this region. This is not a substitute for checking a specific offer of the seller.
Obtaining equipment
Specify the city of receipt: Moscow, Kazan, Novosibirsk, Astana or another point of Russia and Kazakhstan. Delivery composition, available quantity, cost and terms are agreed for your order.
Questions before ordering
Can I connect the MTM5200 directly to the 24V onboard network?
The manufacturer specifies a 10.8–15.6 V DC input. For a 24 V vehicle system, select a suitable power solution separately and agree on the connection arrangements.
Six meters is the length of the antenna cable?
6 m are specified for the power supply cable. Antenna tract and its composition are confirmed separately.
Does the MTM5200 have a 13 W transmitter?
Nope. The MTM5200 is designated by the manufacturer as option 3 W; the 13 W list refers to external speakers rather than radio power.
technical guide for preparing an application
- Buy Motorola MTP6550: the H65PCN6TZ6_N kit and an enquiry for your TETRA network
- MTP6550 and its 1650 mAh battery: shift operation, charging and fleet reserves
- MTP6550 and MTM5200: licences, GPS, TEDS and acceptance testing before purchase
Manufacturer documentation: MTP6000, manual 68015000664-CE; MTP6550, 2012 specification; MTM5000, 2021 specification. The terms of a particular variant and included features are agreed separately.
